HANGCHA Mini Range CDD12-A2MJ-SZ Operation And Maintenance Manual page 13

Password lock function introduction:
1, 2, 3, 4 are the password setting keys, which can be used repeatedly, the password is 4 digits,
and 16 groups of startup passwords can be set;
Two red and green LED indicators.
Password lock function code description

Create/change user password
1) When the vehicle is powered off, enter the administrator password (default: 22222) and press
"OK". If the entered administrator password is correct, the red indicator on the handle keeps
flashing; if the entered administrator password is wrong, the red indicator The light flashes three
times;
2) Enter function code 1, after the green indicator light flashes once, and keeps on, wait for the
administrator to input the user ID, the range is 11, 12, 13, 14, 21, 22, 23, 24, 31, 32, 33, 34, 41, 42,
43, 44, a total of 16 groups;
3) After entering the user ID, press "OK" and the green indicator light will continue to flash.
4) Enter a 4-digit user password (any digit from 1 to 4, the same number can be repeated) and
then press "OK". If the password is created successfully, the green indicator flashes twice and
stays on; if the entered password currently exists , The red indicator light will flash three times;
5) After the password is matched, it will return to step 3 (the green indicator light is always on
before the operation), and the administrator can continue to add the user ID and password;
9