Section2. Cx-Designer; Operation Flow - Omron CX-DESIGNER - INTRODUCTION GUIDE Introduction Manual

CX-Designer
CX-Designer
Installing CX-Designer to a
personal computer
Starting up the
Starting up the
Designer
Designer
Creating a screen
Creating a screen
Setting Project
Properties
Entering project title and labels
System Setting
Allocate system memory,
set communication port etc...
Creating a Screen
Data
Creating lamp, touch switch,
numeral display and graph
etc...
Test/ Validation
Checking errors on the CX-
Designer
Transferring the screen data to NS Hardware
Transferring the screen data to NS Hardware

Operation Flow

the control panel
CX-
CX-
Connecting power supply/
communication cable
System Menu Setting
System Menu Setting
Start Operation
Maintenance and Inspection
Maintenance and Inspection
NS8-V1
NS8-V1
Mount NS on
Refer to NS
Setup Manual
Refer to NS
Setup Manual
Power ON
Start Operation
Host side (PLC)
Host side (PLC)
Setting communication
Setting communication
port
port
Refer to NS
Setup Manual
Creating Ladder program
Power ON