Table of Contents
Advertisement
Toggle High Voltage: Turns the 1000V electrode on and off. To avoid getting shocked by
the 1000V applied to the sensor or possibly damaging the pmCAN's electronics,
always turn the 1000V off before removing or attaching the sensor from the cable (or
the cable from the module).
Hardware Reset: Equivalent to powering the module down then up again.
Reset TPDOs to Factory Settings: These are the parameters displayed and transmitted.
TPDO stands for Transmit Process Data Object.
Toggle TPDO CAN ID Auto Set: Enable and disable TPDO CAN ID Auto Set.
Default: Enabled.
Export & Import Module Configurations: This simplifies the task of programming several
modules the same way.
Table 1 (continued): Task List for pmCAN Modules
14
Advertisement
Table of Contents
Need help?
Do you have a question about the pmCAN Module and is the answer not in the manual?
Questions and answers