Installation Steps - Optex Virtual Loop Installation Instructions Manual

5

Installation steps

Create an installation diagram
Drilling holes in the installation area
Angle fail
(no good)
Complete iinstallation of the unit
Verify the sensor
installation conditions
Place the unit
Set the sensor
Calibration
Distance fail
(no good)
Check the detection
area
OK
P.9 to 10
Record the sensor name and installation layout
and keep them in a safe place.
P.14
P.15 to 17
*Angle adjustments can be made
When using Input/Output,
Use smarthone app
P.6, 8
go to P.21 to 28
When no good,
P.18
P.19, 20
P.17
Record the sensor name and password
and keep them in a safe place.
-7-
go to P.29 to 33