Sensor Installation Recommendations (For Barrier) - Optex Virtual Loop Installation Instructions Manual

6-3

Sensor installation recommendations (for Barrier)

Install the sensors with the layout shown below.
When the installation direction or installation height is inappropriate, the sensor does not operate properly.
- The sensor angles shown below are for vehicles enter parallel to the drive way. The sensor angle should
match the angle of the vehicle (not the driveway).
Installation height : The bottom of the sensor is 500 mm (20in.) from the ground
*1 : Install the sensor to be flush with the side surface of the driveway of barrier operator or ticket vending /
payment machine.
As far as possible
within 500mm (20in.) *1
Application : Barrier Protection 90 deg
Barrier
2800mm(110in.) or less
1000mm(40in,) or more
90°
Side view
-9-
1500ｍｍ
(60in.)
90°
Application : Barrier Activation 90 deg
Ticket vending / Payment Machine
300mm(12in.) or more
500mm(20in.)
Island