App Description (Parameter Screen) - Optex Virtual Loop Installation Instructions Manual

8-3

App description (Parameter screen)

- Check and change the sensor parameters.
Parameter
Application Barrier Protection 90 deg
Detection range
Main sensitivity
Fine tuning presence
Close range sensitivity
Side approach detection On
Vibration sensitivity
Sensitvity boost
Sensitvity boost timer
Relay respose time
Presence detection timer 15min
Slide gate cancellation
Calibration
Caution
- After changing settings, be sure to tap the Send icon to send the settings to the sensor.
- Perform this if the operation is unstable, or there is a false detection or loss of detection.
Calibration
- Please perform this when there are no vehicles or objects in the surrounding.
■ Applications
Change it by tapping Menu Icon > Favorites > Select application.
[1] Detection range
Refer to page 8
3.5m (11.5' )
[2] Main sensitivity
Lv.2
Refer to page 25
Lv.4
[3] Fine tuning presence
Lv.2 Refer to page 25
[4] Close range sensitivity
Refer to page 26
Off
[5] Side approach detection
Off
Refer to page 26
Off
[6] Vibration sensitivity
Lv.1
Refer to page 26
[7] Sensitivity boost
Lv.1(Low)
Refer to page 27
[8] Sensitivity boost timer
Refer to page 27
[9] Relay response time
Refer to page 28
[10] Presence detection timer
Refer to page 28
[11] Slide gate cancellation
Refer to page 28
-24-