Language; Factory Setting; System Info; Lighting - TechniSat DIGITRADIO 22 Operating Instructions Manual

TUNE/OK rotary knob.
Use the TUNE/OK rotary knob to select the following options:
>
[Digital]
[Analogue]
Press the TUNE/OK rotary knob to save.
>

12.2 Language

Select the [Language] entry in the MENU and press the TUNE/OK rotary
>
knob.
Use the TUNE/OK rotary knob to select one of the available languages and
>
confirm your selection by pressing the TUNE/OK rotary knob.

12.3 Factory setting

If you change the location of the device, e.g. if you move house, you may no longer be
able to receive the saved channels. In this case, you can delete all saved channels by
resetting to factory settings and then start a new channel search.
Select the [Factory settings] entry in the MENU and press the
>
TUNE/OK rotary knob.
Use the TUNE/OK rotary knob to select the [Yes] entry to perform the
>
factory setting and press the TUNE/OK rotary knob.
All previously saved channels and settings are deleted. The device is now
in the factory settings.
The display shows [Restart...] and the device starts with the
>
language selection.

12.4 System info

You can query the currently installed software version under Software version.
Select the [System Version] entry in the MENU and press the
>
TUNE/OK rotary knob.
> The current SW version is displayed.

12.4.1 Lighting

Select the [Lighting] entry in the MENU and press the TUNE/OK rotary
>
knob.
[Level]
You can choose between the brightness levels [High], [Medium] and [Low]
for normal playback operation. Use the TUNE/OK rotary knob to select a
brightness level and press the TUNE/OK rotary knob to save.
25