Manual Station Search; Search Setting - TechniSat DIGITRADIO 22 Operating Instructions Manual

9.4 Manual station search

Turn the TUNE/OK rotary knob to set the desired station or frequency.
>
The display shows the frequency in steps of 0.05 MHz.

9.5 Search setting

The sensitivity of the search run can be set in this menu item.
Open the MENU > [Search setting] and press the TUNE/OK rotary
>
knob.
Select whether the search should only stop for strong channels [Strong
>
channels] or for all channels (including weak channels) [All channels].
With the All channels setting, the automatic search stops at every available
channel. This can result in weak stations being played back with noise.
Press the TUNE/OK rotary knob to save.
>
9.6 Store FM stations in a memory location
The programme memory can store up to 20 stations in the FM range.
> First set the desired channel.
To save this station to a memory location, press and hold the 3+ button
>
during playback until [Save favourite] appears in the display. Then use
the TUNE/OK rotary knob to select a favourite memory (1...20). Press
the TUNE/OK rotary knob to save.
> Repeat this procedure to save additional transmitters.
You can also press one of the preset 1 or 2 direct selection buttons directly to
select a station.
save your settings by pressing and holding the corresponding button.
Alternative:
Select MENU > [Save favourite].
>
19