Setting Time/Date; Setting Backlight; Setting Language; Factory Reset - TechniSat DigitRadio 215 Instruction Manual

4. To set your prefer EQ, press
to select 'My EQ Setup', and then press
button to confirm. Press
select through 'Treble' and 'Bass', and then
press button to confirm. Press
button to set the value of Treble and Bass
among '-7' to '+7', and then press
confirm. Press and hold MENU button to exit
setting.

Setting Time/Date

1. Press and hold MENU button, and then press
or button to select 'System Settings',
press button to confirm.
2. Press or
and then press
3. Press or
then press button to confirm the setting
Set Time/date:
Auto update:
Set 12/24 hour
format:
Set date
format:
4. Then set time according to your personal
preference.

Setting Backlight

This radio display has a backlight with adjustable
brightness level and adjustable timeout (this is the
time delay, in seconds, after which the display switch
to set backlight level of Dim level).
1. Press and hold MENU button, and then press
or button to select 'System Settings',
press button to confirm.
2. Press or
and then press
3. Press or
'Dim level', and then press
confirm.
10
or
or button to
button to
button to select 'Time/Date',
button to confirm.
button to select options, and
Manually set-up both Time
and Date
'from Any', 'from Digital
Radio', 'Update from FM' or
'No Update'
'12 Hour' or '24 Hour'
'DD-MM-YYYY' or
'MM-DD-YYYY'
button to select 'Backlight',
button to confirm.
button to select 'On level' and
button to
button 4. Press
and backlight timeout, and then press
button to confirm the setting.
or
On level
Dim
level

Setting Language

This feature enables you to change menu language.
1. Press and hold MENU button, and then press
press
2. Press
and then press
3. Press
and then press

Factory Reset

Doing a factory reset clears all user defined setting,
replacing them with the original default values, so
time/date, DAB station list and preset stations are all
lost.
1. Press and hold MENU button, and then press
or
press
2. Press
and then press
3. Press
press

Viewing Software Version

This information may be requested when dealing
with technical support issues.
1. Press and hold MENU button, and then press
or
press
2. Press
Version', and then press
The software version will show on the display.
or button to set backlight level
High
Medium
Low
High
Medium
Low
or button to select 'System Settings',
button to confirm.
or button to select 'Language',
button to confirm.
or button to select your language,
button to confirm.
button to select 'System Settings',
button to confirm.
or button to select 'Factory Reset',
button to confirm.
or button to select 'Yes', and then
button to confirm.
button to select 'System Settings',
button to confirm.
or button to select 'Software
button to confirm.