Switch Off The Device; Source Selection; Setting The Volume; Display - TechniSat DIGITRADIO 22 Operating Instructions Manual

After switching on for the first time, the menu language must first be selected.
To do this, turn the TUNE/OK rotary knob (6) and then press it to save the
selected language. An automatic station search is then carried out via DAB+.
After the search, the first DAB+ station in the station list is played.
If the device is in power-off mode, press and hold the On/Standby button
(1) is pressed briefly.

6.3.2 Switch off the device

You can switch the device to standby mode by pressing the On/Standby
>
button (1). The date/time and active alarm clock are shown on the display.
Briefly press and hold the button in standby mode to switch the device off
completely (power-off mode).

6.3.3 Source selection

The MODE button (2) can be used to switch between the DAB+ (digital
>
radio), FM (FM) and Bluetooth sources. To do this, press the button briefly
several times.
6.3.4

Setting the volume

Adjust the volume using the VOLUME rotary knob (13). Turning to the right
>
increases the volume, turning to the left decreases the volume.
The set volume is shown on the display using a bar chart.

6.3.5 Display

Depending on the channel, the additional information displayed can be switched through
using the MENU/ INFO button (8).
Press the MENU/INFO button (8) briefly several times to display the title,
>
artist, reception strength etc., for example.
6.3.5.1 Slideshow
Some DAB+ stations transmit additional information such as the album cover of the
current track, adverts or weGer data. The size of the picture can be adjusted by
pressing the TUNE/OK rotary knob (6).
6.3.6

Ambient light

The DIGITRADIO 22 has ambient light LEDs on the underside. You can either activate
(and deactivate) the light automatically via the motion detector on the front of the device,
see chapter "12.6 Motion detector" or manually by pressing the VOLUME rotary
knob.
13