Recalling Dab+ Stations From A Memory Location; Overwriting/Deleting A Programme Position Memory; Signal Strength - TechniSat DIGITRADIO 22 Operating Instructions Manual

To save this station to a memory location, press and hold the 3+ button
>
during playback until [Save favourite] appears in the display. Then use
the TUNE/OK rotary knob to select a favourite memory (1...20). Press
the TUNE/OK rotary knob to save.
> Repeat this procedure to save additional transmitters.
You can also press one of the preset 1 or 2 direct selection buttons directly to
select a station.
save your settings by pressing and holding the corresponding button.
Alternative:
Select MENU > [Save favourite].
>
8.2.5 Recall DAB+ stations from a memory location
> To call up a station that you have previously stored in the favourite memory,
briefly press the Preset 3+ button and select a station preset (1...20) using
the TUNE/OK rotary knob. Press the TUNE/OK rotary knob to play the
station.
If no station is stored in the selected programme position, [(Empty)]
appears in the display.
Alternatively, you can also press the corresponding direct selection button Preset
1 or 2
be utilised.
Alternative:
In the MENU, select > [Favourites list].
>
8.2.6

Overwriting/deleting a programme position memory

> Simply save a new channel to a favourite memory location as
described.
All memory locations are deleted when the factory settings are called up.

8.2.7 Signal strength

Briefly press the MENU/INFO button several times until the signal strength bar
>
is displayed.
> The signal strength is shown on the display using a bar chart.
16