How To Cancel Target Tracking; How To Cancel Tracking For Individual Tt Targets - Furuno FAR-2228-NXT Operator's Manual

3.7

How to Cancel Target Tracking

When the number of tracked targets reaches maximum capacity, the alert box shows
"TT TGT FULL(MAN)" or "TT TGT FULL(AUTO)", based on the selected TT mode. No
new targets can be acquired until a tracked target is lost or tracking is canceled. When
this occurs, cancel tracking for non-dangerous targets as required.
3.7.1

How to cancel tracking for individual TT targets

Using the control unit (RCU-014)
1. Place the cursor on the tracked target, or tracked target’s data, to cancel.
2. Press the TARGET CANCEL key.
Using the CURSOR menu
Note: This methods requires [TGT CANCEL SETTING] in the second page of the
[CURSOR MENU] to be set as [ANY] or [TT ONLY].
1. Right-click the operational display area to show the [CURSOR MENU].
2. Select [TARGET CANCEL], then left-click.
3. Select the tracked target to cancel, then left-click.
4. Right-click to complete the procedure.
3.7.2 How to cancel tracking for all TT targets
Using the control unit (RCU-014)
Press and hold the TARGET CANCEL key.
Using the menu
1. Open the menu.
2. Select [5 TT•AIS].
3. Select [6 TT].
4. Select [3 ALL CANCEL].
5. Select [YES] to cancel tracking for all TT targets.
6. Close the menu.
3. TARGET TRACKING (TT)
3-7