1.15.1
How to reset the user settings
Menu operation
1. Open the menu.
2. Select [9 INITIAL SETTINGS].
3. Select [4 USER SETTINGS].
You can also access this menu from the
[USER SET] box, as shown to the right.
4. Select [2 PILOT SETTING].
5. Select [YES].
6. Close the menu.
From the on-screen box
Place the cursor on the [USER SET] box,
then long-press the left button.
Note 1: Items not shown in the table on the
previous page keep their previous settings
when [PILOT SETTING] is activated.
Note 2: TT tracking is continued after [PILOT SETTING] is activated.
Note 3: The radar map displays the same map as before [PILOT SETTING] is activat-
ed.
1.15.2
How to save/load user settings
1. Open the menu.
2. Select [9 INITIAL SETTINGS].
3. Select [4 USER SETTINGS].
4. Select [USER1(2) LOAD] or [USER1(2) SAVE] to recall or save user settings, re-
spectively.
5. Select [YES].
6. Close the menu.
When loading settings, the following points apply:
If the newly loaded settings cannot be applied to items not listed in the table above,
then these items keep their previous settings.
TT tracking is continued after the settings are loaded.
The radar map displays the same map as before the settings were loaded.
1. OPERATIONAL OVERVIEW
1-25