On-screen menu box operation
1. Select the appropriate EBL box.
2. The guidance box reads "EBL ON/". Press the left button to turn on the EBL.The
guidance box now reads "EBL SET L=DELETE /".
3. Press the left button again and the cursor jumps to inside the operational display
area. The guidance box now reads "EBL FIX L=DELETE/".
4. Spin the scrollwheel, or use the trackball, to move the EBL until the active EBL
bisects the target of interest, then press the left button to anchor the EBL. Read
the bearing at the lower-left corner of the screen.
5. Press the EBL OFF key to erase EBLs.
1.33.2
True or relative bearing
The EBL readout is affixed by "R" (relative) if it is relative to own ship's heading, "T"
(true) if it is referenced to the north. True or relative indication is available regardless
of presentation mode.
1. Open the menu.
2. Select [3 NAV TOOLS].
3. Select [3 EBLVRMCURSOR SET].
4. For IMO/A/R-type radars, select [5 EBLCURSOR BEARING].
For B-type radars, select [2 EBL1] or [3 EBL2] as appropriate.
5. Select the [REL] or [TRUE] as required, then press the ENTER MARK key.
6. Close the menu.
Note: The EBL and its indication change with gyrocompass changes as follows:
Gyro heading
HEAD UP / relative
HEAD UP / true
COURSE UP / relative
COURSE UP / true
NORTH UP / relative
NORTH UP / true
EBL indication and EBL marker are unchanged.
EBL indication does not change, however the EBL marker
moves accordingly
EBL indication does not change, however the EBL marker
moves accordingly.
EBL indication and EBL marker are unchanged.
EBL indication does not change, however the EBL marker
moves accordingly
EBL indication and EBL marker are unchanged.
1. OPERATIONAL OVERVIEW
EBL changes
1-55