How To Delete Tracks - Furuno FAR-2228-NXT Operator's Manual

5.8.5

How to delete tracks

There are three methods to delete tracks: by percentage of track, by track color or by
cursor selection.
How to erase tracks by percentage
1. Open the menu.
2. Select [2 MARKS].
For A/B/W-types with Radar Plotter functionality, select [2 MARKS•CHART].
3. Select [8 DELETE DATA].
4. Select [5 OS TRACK-COLOR/TIME] or [6 TGT TRACK-COLOR/TIME].
Note: [6 TGT TRACK-COLOR/TIME] is only shown for A/B/W-type radars.
5. Select the percentage of the track you wish to delete, then left-click. The available
options are: [30%], [50%], [80%] or [ALL].
6. Close the menu.
How to erase tracks by color (For A/B/W-types only)
1. Open the menu.
2. Select [2 MARKS].
For A/B/W-types with Radar Plotter functionality, select [2 MARKS•CHART].
3. Select [8 DELETE DATA].
4. Select [5 OS TRACK-COLOR/TIME] or [6 TGT TRACK-COLOR/TIME].
5. Select the color of the track you wish to delete, then left-click. The available op-
tions are: [RED], [GRN], [BLU], [YEL], [CYA], [MAG] or [WHT].
6. Close the menu.
5. VIDEO PLOTTER OPERATION
5-15