How To Display And Set Up Navigational Data; How To Set Up The Navigational Data - Furuno FAR-2228-NXT Operator's Manual

1.46

How to Display and Set Up Navigational Data

Wind, depth, ocean current, wave data, water temperature, date and time and way-
point data can be displayed on this radar, however appropriate sensors are required.
1.46.1

How to set up the navigational data

1. Open the menu.
2. Select [7 INFORMATION BOX].
3. Select [4 NAV DATA SETTINGS].
4. Referring to the table below, select the appropriate menu item, then press the EN-
TER MARK key.
Page 1
[2 DEPTH]
[3 DEPTH GRAPH SCALE] [10], [20], [50], [100], [200], [500] (m)
[4 DEPTH MARK]
[5 CURRENT]
[6 WIND]
[7 WIND REFERENCE]
Page 2
[2 TEMPERATURE]
[3 WPT DATA]
[4 WAVE DATA]
[5 WAVE STAB]
Note 1: [4 WAVE DATA] requires connection to a PC with the wave analysis soft-
ware installed.
Menu item
[OFF], [ON]; [m], [ft]
[000] to [500] (m)
[OFF], [ON]
[OFF], [ON]; [kn], [m/s]
[APPARENT], [NORTH], [THEORETICAL]
[OFF], [ON]; [°C], [°F]
[OFF], [REL], [TRUE]
[OFF], [ON]
[NORTH], [THEORETICAL]
1. OPERATIONAL OVERVIEW
Available settings
1-87