15How To Offset The Colors For Multicolored Trail (B/W-Type Only) - Furuno FAR-2228-NXT Operator's Manual

1.37.15 How to offset the colors for multicolored trail (B/W-type only)
You can “shift” the order of the trail colors. When this function is active, the first color
used to paint the trail is changed.
Note: If the trail time set at the [TRAIL] box is longer than the time selected at [4 TRAIL
LENGTH] in the [TRAIL] menu, trails are not displayed after the trail time elapses. For
example, based on the above figure, if the trail time is set to [05:00] at the [TRAIL] box
and [4 TRIAL LENGTH] is set to [12H], the trail coloration will stop after Yellow.
To offset the colors, follow the procedure below.
1. Open the menu.
2. Select [1 ECHO].
3. Select [0 NEXT].
4. Select [4 TRAILS]. The [TRAILS] menu appears.
Note: You can also right-click the [TRAIL] box to access this menu.
5. Select [0 NEXT] to show the second page of the menu.
6. Select [6 LONG TRAIL COLOR].
7. Select [2 OFFSET TRAIL COLOR].
8. To offset the color by one, select [ON].
For example, if you selected [FUSCHIA] as the starting color for multicolor trails,
the first color after the offset becomes [MAROON].
To leave the colors in their original order, select [OFF].
9. Close the menu.
1. OPERATIONAL OVERVIEW
1-69