1.47
How to Use the Information Box
The information box shows target data, navigational data and zoomed areas of the ra-
dar display. To set up the information box, do the following:
1. Open the menu.
2. Select [7 INFORMATION BOX].
3. Select and set the appropriate menu item, referring to the table below.
4. Close the menu.
Menu item
[2 OWN SHIP INFO]
[3 DISPLAY NAV DATA]
[4 NAV DATA SETTINGS] See section 1.46
[5 ZOOM]
[6 ZOOM DISPLAY]
[7 TARGET DATA]
Settings
See section 1.11,
Set up various own ship information,
section 1.12 and
such as sensors used for position fix,
section 1.13 for
date and time format/offsets, heading
details.
and speed sensors used.
[OFF]
Disable navigational data display.
[ON]
Enable navigational data display.
Set up the format in which various
for details.
navigational data is displayed in the
[INFORMATION BOX].
[OFF]
Disable zoom magnification.
[2TIMES]
Set zoom magnification at 2 .
[3TIMES]
Set zoom magnification at 3 .
[STAB GND]
Ground stabilized zoom (Geo-
[STAB HDG]
Heading stabilized zoom (Rela-
[STAB NORTH]
[TT TRACK]
North stabilized zoom (True).
Tracked targets are zoomed.
[1BOX]
See the figure on the following page.
[2BOX]
[3BOX]
[LARGE]
1. OPERATIONAL OVERVIEW
Description
graphically fixed).
tive).
1-89