Introduction; Revision Service - AUTO GYRO Cavalon Maintenance Manual

Aircraft AutoGyro
Maintenance Manual Cavalon 915 iS / 916 iS
1 – INTRODUCTION
This manual provides accepted and recommended maintenance procedures applicable for the Cavalon
gyroplane fitted with the Rotax 915 iS / 916 iS engine, designed and manufactured by AutoGyro GmbH,
Hildesheim, Germany. The generic term "maintenance" comprises checks, inspections, replacement,
repair and other tasks, which are defined in "01-11-00 Definitions and Standard Procedures". The
manual also provides a full description of the aircraft and its systems and troubleshooting (fault isolation)
procedures. Where applicable, the manual refers to related manuals, such as the engine manufacturer's
documentation or Component Maintenance Manuals, for example battery, avionics, or optional
equipment.
All task descriptions follow aerospace, industry and safety standards or special AutoGyro procedures.
The procedures, methods, instructions and parameters specified in this manual must be adhered to by
all means. It is not permitted to change procedures or to alter parameters provided herein. Proposed
deviations from the procedures, methods and instructions contained in this manual should be directed
to:
AutoGyro GmbH
Technical Support
Dornierstraße 14
31137 Hildesheim
GERMANY
Phone: +49 (0) 51 21 / 8 80 56-00
E-Mail: info@auto-gyro.com
The manual has been prepared in accordance with ATA Specification No. 100 being a common standard
in aviation and for your convenience. The ATA100 numbering system is described under "Organization
and Handling of the Manual".
This manual will be revised as necessary to incorporate changes in design, parts, approved procedures,
or parameters. Note that the manual is only valid if available in current version. The use of an out dated
manual may render the aircraft in unsafe or even not airworthy condition. The revision service is
described below.
Service Information Letters (SIL), Service Bulletins (SB) or Airworthiness Directives (AD) will also be
covered by the revision service and incorporated in the maintenance manual.

Revision Service

This manual must always be maintained in current, up-to-date status. The latest version status is
available at www.auto-gyro.com. Note that the manual is subdivided into 6 parts which will be revised
individually. As an example, the revision index for the aircraft maintenance manual (AMM), Cavalon 915
iS / 916 iS (CV_915iS / 916 iS), Part B could be 'AMM-CV-915 iS/916 iS-B-2023-12'. Note that the date
code is 'yyyy-mm' so files will sort chronologically.
For the purpose of current status this manual will not be published in paper format. A current
personalized copy will be provided by AutoGyro GmbH for all certified and registered service partners
on the basis of a subscription service. Registered users will be informed about new revisions. We
recommend not to keep printouts or paper copies for reference.
Part A – Introduction and
AMM-CV-915iS/916iS-EN- Page 4 of 15
A-2023-12 Declarations