AUTO GYRO Cavalon Maintenance Manual page 291

67-10-00 4-1 REMOVAL-INSTALLATION: CENTER CONSOLE
GENERAL, REFERENCES AND REQUIREMENTS
Task may only be performed by an organization or individual trained and entitled to carry out 'Professional
Maintenance'!
Secure gyroplane against unauthorized or unintended operation!
SPECIAL TOOLS AND CONSUMABLE MATERIALS
None
PRECAUTIONS AND SAFETY MEASURES
PROCEDURES
Removal
1 Untighten the 3 central bolts by about 5 revolutions.
2 Unscrew and remove the 10 circumference bolts.
EFFECTIVITY: Cabin heating installed
3 Remove dummy plug and unscrew bolt in order to detach heating control lever from heating control valve
(use a 2.5 mm round head Allen key).
4 Apply tape at the surrounding areas as surface protection.
5 Pull console aft and slip-out brake fluid reservoir (front).
Installation
6 Re-install in reverse order (work steps 5 to 1)
NOTE: The heating control lever is connected to the valve by a force-type connection.
Ensure correct installation and operation!
AMM-CV-915iS/916iS-EN-
E-2023-12
Aircraft
Maintenance Manual
Part E - 67-10-00 4-1
AutoGyro
Cavalon 915 iS / 916 iS
Page 1 of 2