Test Wi-Fi With Ewm-W194M201E Module (Sdio Interface); Test Bluetooth With Ewm-W194M201E Module (Uart Interface) - Advantech ROM-2620 User Manual

Nxp i.mx 8ulp 1200 cortex®- a35 osm 1.1 computer-onmodule
Hide thumbs Also See for ROM-2620:
Table of Contents

Advertisement

3.3
M.2
3.3.1

Test Wi-Fi with EWM-W194M201E Module (SDIO Interface)

1.
Press enter after boot. The system will stop at u-boot, and change dtb file by
below command.
# setenv fdtfile imx8ulp-rom2620-a1-m2-sdio-88w8997.dtb
# saveenv
# boot
2.
Install driver by below command.
# rmmod mwifiex_sdio mwifiex
# modprobe moal mod_para=nxp/wifi_mod_para.conf
# modprobe btnxpuart
3.
WIFI test command.
# ifconfig mlan0 up
# wpa_passphrase ASUS-917C qwert12345 > /tmp/wpa.conf
# wpa_supplicant -d -B -i mlan0 -c /tmp/wpa.conf
# udhcpc -i mlan0
3.3.2
Test Bluetooth with EWM-W194M201E Module (UART
Interface)
1.
Please refer to the 3.3.1 step 1.
2.
Please refer to the 3.3.1 step 2.
3.
Bluetooth test command.
# hciconfig hci0 up
# bluetoothctl
# discoverable on
# pairable on
# scan on
[NEW] FC:18:3C:8D:75:F4 myphone
# scan off
# pair FC:18:3C:8D:75:F4
# connect FC:18:3C:8D:75:F4
17
ROM-2620 User Manual

Advertisement

Table of Contents
loading

Table of Contents