Configuring The Scsi Interface With Scsiselect - Advantech PCA-6277-B Manual

plug to ensure that the device will operate at its maximum speed. If
you use a different kind of terminator plug, the data I/O rate will
decrease.
By default, termination on the SCSI controller itself is set to Automatic
(the preferred method). We recommend that you do not change this
default setting.
7.5 Configuring the SCSI interface with
SCSISelect
SCSISelect, included with the CPU card, enables you to change SCSI
settings without opening the computer. SCSISelect also enables you
to low-level format or verify the disk media of your SCSI hard disk
drives. The following table lists the available and default settings for
each SCSISelect option.
Note: The default settings are appropriate for most systems.
Run SCSISelect if you need to change or view current
settings, or if you would like to run the SCSI disk
utilities. See the descriptions of each option starting on
next page.
Chapter 7 SCSI Setup and Configurations 9 7