Table of Contents
Advertisement
2.4
HDD/SSD Installation
2.4.1
For PPC-421W
1.
Follow the procedures in Section 2.3 to open the rear cover. Remove the screws
circled in red in Figure 2.11 to retrieve the SSD bracket(s).
2.
Attach the SSD to the SSD bracket using four screws from the accessory box
(eight screws if installing two SSDs) (see Figure 2.12 for reference).
3.
Replace the SSD bracket and tighten screws to affix in place. Connect the SSD
cable to the main board (Figure 2.13).
Figure 2.11
Figure 2.12
Figure 2.13
11
PPC-415W/421W User Manual
Advertisement
Table of Contents
