Table of Contents
Advertisement
2.8
Riser Card Installation
1.
Refer to Section 2.3 to open the rear cover and remove the reinforcement plate.
Remove the screws and shield circled in red in Figure 2.32.
2.
Install the expansion card.
3.
The device is equipped with a PCIe x4 riser card (PCM-939) as a default (see
Figures 2.32 and 2.33).
4.
An expansion PCI riser card can be easily installed as shown in Figures 2.34
and 2.35.
Note!
The maximum dimensions supported for expansion cards is 175 x 106.7
mm/6.88 x 4.2 in.
PPC-415W/421W User Manual
Figure 2.23
Figure 2.25
Figure 2.24
Figure 2.26
18
Advertisement
Table of Contents
