Table of Contents
Advertisement
MAINTENANCE
146
Note
Always inspect the wheel bearings at
the same time as the steering bearings.
Inspecting the Steering for Free Play
To inspect the steering:
▼ Lubricate
condition of the steering (steering
head)
with
requirements.
▼ Position the motorcycle on level
ground, in an upright position.
▼ Raise the front wheel above the
ground and support the motorcycle.
▼ Standing
motorcycle, hold the lower end of
the front forks and try to move
them forwards and backwards.
▼ If any free play can be detected in
the steering head bearings, ask
your authorized Triumph dealer to
inspect and rectify any faults before
riding.
▼ Remove the support and place the
motorcycle on the side stand.
and
inspect
bearings
in
accordance
scheduled
maintenance
at
the
front
Wheel Bearings Inspection
Riding with worn or damaged front
or rear wheel bearings is dangerous
and may cause impaired handling and
instability leading to an accident.
If in doubt, have the motorcycle
inspected by an authorized Triumph
dealer before riding.
If the wheel bearings in the front or
rear wheel allow play in the wheel hub,
are noisy, or if the wheel does not turn
smoothly, have your authorized Triumph
dealer inspect the wheel bearings.
The wheel bearings must be inspected
the
at
the
scheduled maintenance chart.
of
the
Inspecting the Wheel Bearings
To inspect the wheel bearings:
▼ Position the motorcycle on level
ground, in an upright position.
▼ Raise the front wheel above the
ground and support the motorcycle.
▼ Standing
motorcycle, gently rock the top of
the front wheel from side to side.
Warning
intervals
specified
at
the
side
in
the
of
the
Advertisement
Chapters
Table of Contents
