Rear Brake Fluid Level Inspection And Adjustment - Triumph Street Triple S 2022 Owner's Handbook Manual

Table of Contents

Advertisement

To adjust the brake fluid level:
▼ Loosen the reservoir cap retaining
screws and remove the reservoir cap
and the diaphragm seal.
▼ Fill the reservoir to the upper level
line using new DOT 4 from a sealed
container.
▼ Reinstall the reservoir cap making
sure that the diaphragm seal is
correctly positioned between the
reservoir cap and the reservoir body.
▼ Tighten the reservoir cap retaining
screws to 9 lbf in (1 Nm).
MAINTENANCE
Rear Brake Fluid Level Inspection
and Adjustment
Warning
If there has been an appreciable drop
in the level of the fluid in either fluid
reservoir,
consult
Triumph
dealer
riding.
Riding with depleted brake fluid levels,
or with a brake fluid leak is dangerous
and
will
cause
performance potentially leading to loss
of motorcycle control and an accident.
The reservoir is visible from the right
hand side of the motorcycle, forward of
the muffler, below the rider's seat.
chrk
1. Upper level line
2. Lower level line
To inspect the rear brake fluid level:
▼ Check the level of brake fluid visible
in the reservoir.
▼ The brake fluid level must be kept
between the upper and lower level
lines (reservoir held horizontal).
your
authorized
for
advice
before
reduced
brake
1
2
159

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Street triple r 2022Street triple rs 2022

Table of Contents