Troubleshooting; Test Mode; Entering The Test Mode; Test Mode Functions - Saeco MAGIC M2 Technical Manual

14

TROUBLESHOOTING

14.1

Test Mode

This function is meant to check the correct operation of the mechanical, electromechanical and electronic components that are inside the machine.
Be careful when entering the test mode of the machine: in this mode some safety devices
set by the manufacturer are excluded.
14.2

Entering the Test Mode

Access the programming menu by pressing the "settings" icon.
Enter the password of the technical profile. Select the item "System", subsequently the item "Technical specifications".
14.3

Test Mode Functions

The test mode is divided into several pages. For each page, the machine allows to perform various tests.
The contents of each page are listed below:
• Components test
• Machine input verification
• Output Test
14.3.1 Components test
1 Coffee pump
2 Steam pump
3
Compressor
4 Brew group
By clicking on every component present in this screen, the specific text is activated. A pop-up is shown with the relative data and outcome of the test.
(only versions M)
(only versions M)
English
71