Introduction To The Manual; Preamble; Icons Used; Documentation Required - Saeco MAGIC M2 Technical Manual

1

INTRODUCTION TO THE MANUAL

1.1

Preamble

This publication is an integral part of the
machine and has to be read carefully to
ensure its correct use in accordance with
the essential
requirements.
This manual
information necessary to properly perform
the operating, installation, cleaning and
maintenance procedures.
Always refer to this manual before carrying
out any operation.
This article is marketed under the responsibility of SaGa Coffee S.p.A. which
guarantees the product. Saeco is a registered trademark of Koninklijke Philips N.V.
and its use is licensed by Koninklijke Philips N.V.
This publication should be carefully kept
with the machine throughout its service
life, including transfers of ownership.
The manufacturer reserves the right to
make changes without prior notice.
1.2

Icons Used

Various kinds of warnings are contained in this manual to highlight the different
hazard or competence levels. Each icon is followed by a message suggesting
operating and behaviour procedures and providing useful information for the
correct operation of the machine.
Warning
It is used to highlight danger situations for the persons in charge of using, refilling
and servicing the machine.
Prohibition
It is used to highlight actions/operations not to be performed.
Important
It is used to indicate operations that, if correctly performed, preserve machine
performance.
Suggested solutions
It is used to indicate alternative procedures which make programming and/or
maintenance operations quicker.
User
It is used to indicate the user of the machine. Users are not allowed to perform any
cleaning or maintenance operations.
health and
contains the technical
Supply operator
It is used to indicate those operations that must be performed only by the person in
charge of refilling and cleaning the machine.
Supply operators can not perform any operations requiring a Maintenance
Technician.
safety
Maintenance technician
It is used to signal those operations that must be performed only by the specialised
maintenance technicians.
1.3

Documentation Required

The following documents are necessary for repair:
• Instruction booklet of the specific model
• Technical documentation of the specific model (diagrams, exploded views).
1.4

Tools and Equipment Required

In addition to standard tools, the following tools are required:
1.5

Safety Warning

Read the machine instruction booklet
before servicing it.
Follow all regulations in force regarding
repair of household appliances.
Before repairing the machine, always
unplug it from the socket. Turning off the
power button is not enough to avoid
electrical discharges.
The following appliance corresponds to
insulation class I. Once repair is completed,
perform
dielectric strength test.
Torx screwdriver T10 and T20
Phillips screwdriver PH2
Flat-head screwdriver 0.8 x 4 x 80
Allen wrench no. 5
Long nose pliers
Pliers for Oetiker clamps (or pair of tongs)
the isolation test
English
and the
17