Closing The Upper Lid; Coffee Grind Adjustment - Saeco MAGIC M2 Technical Manual

English
The anti-scale filter should be replaced
whenever indicated by the machine.
Before descaling, remove the anti-scale
filter from the water tank.
Remove the water filter from its packaging. Set the filter in the standard position on
letter B. Use the water hardness test strip provided with the machine. Set the
"Intenza Aroma System" as specified on the filter package (see section "Measuring
and Adjusting Water Hardness").
A Soft water
B
Hard water (standard)
C Very hard water.
Immerse the water filter vertically in cold water (with the opening positioned
upwards) and gently press its sides to let the air bubbles out.
Remove the tank from the machine and empty it.
Remove the small white filter from the tank and store it in a dry place sheltered
from dust.
Put the filter into the empty tank. Press it to its limit stop.
Fill the tank with fresh drinking water and reinsert it into the machine. Place a
container under the hot water dispensing spout.
Access the programming of the machine as described in the paragraph "Access to
the programming menus". Tap the "menu" icon to view the appliance's menu
functions.
32
Select "Machine settings". Select "Maintenance". Select "Water filter settings".
Activate the water filter.
Once the operation is finished fill the water again up the MAX level with fresh
drinking water. The Filter 100% icon appears on the machine-ready screen to
indicate that the filter has been installed.
7.6.1 Replacing the water filter
The filter icon turns red when the range of
the filter drops below 10%. Replace the
filter when the notice is displayed or when
its range is below 1%.
Replace the water filter at least every 3
months, even if the machine has not yet
indicated the need to replace it.
Pull out the water filter. Follow the steps indicated in the "Water filter" section.
Replace the filter and activate the new one. The display automatically updates the
number of filters used. This datum is updated on the menu only if the user has
installed a new filter before exhausting the previous one, or in any case, not
exceeding the eighth filter in a row. Fill the water tank again up to the MAX level
with fresh drinking water.
Replacing the Filter after Using 8 Filters
Pull out the water filter. Follow the steps indicated in the "Water filter" section. All
operations relating to the descaling phase are requested as well. The display
updates the number of used filters automatically, taking it to 0/8. However, only
after descaling has finished and before the new filter activation. Fill the water tank
again up to the MAX level with fresh drinking water.
7.7

Closing the Upper Lid

(* only versions M2, M2+, B2 and B2+).
After refilling and during normal operation, the upper protection cover must always
be fitted and locked using the special key in order to prevent access to
unauthorised people. In order to lock the upper lid, position it and close it using
the special key supplied.
7.8

Coffee Grind Adjustment

The machine allows the coffee grind to be slightly adjusted in order to adapt it to
the kind of coffee used. For any adjustments, use the lever located on the inner
side of the service compartment.
Remove the drip tray.