Description Of Controls; Power Button; Touch Screen Control Panel; Operating In Normal User Mode - Saeco MAGIC M2 Technical Manual

Automatic machine for espresso coffee and hot beverages
Hide thumbs Also See for MAGIC M2:
Table of Contents

Advertisement

English
6

DESCRIPTION OF CONTROLS

6.1

Power button

It is located in the rear of the machine. If set to the "I" position the machine turns
on (electrical functions enabled). If set to the "O" position the machine turns off
(electrical functions disabled).
6.2

Touch Screen Control Panel

Only use fingers to interact with the
touchscreen; do not use sharp objects.
Using high-quality content will affect the
general performance.
Tap
Tap icons, functions and objects to activate or open context menus.
Move and drag
To move and drag icons and objects, tap and drag them to a new location.
Scroll
Slide your finger to the right, left, up or down on the touchscreen to scroll through
the values, screens and functions.
28
6.3

Operating in normal user mode

The layout and arrangement of the icons/screens in this manual is indicative only
and may vary from those displayed on the appliance, depending on the settings
(layouts, themes, and/or icons). When operating normally, the appliance displays
the screen with the available selections. In the event that an anomaly is detected by
the control electronics, a message will be displayed, indicating the fault/error. Some
selections may be disabled when certain types of faults occur (e.g. product
containers empty, etc.). With some of the personalised settings (i.e. moving the
beverages to a different place) some selections may not be displayed: simply scroll
through the screen.
1
Status panel
2
Beverage selection area
6.3.1
Status panel
The appliance status can be displayed (e.g. faults, etc.) via the status panel.
The status panel:
• Displays fault/error notifications
• Displays the nutritional information of the selections
• Allows the language of the displayed messages to be changed
• Displays the notice to fill the trays and containers
• Displays the available wash functions
• Provides access to the programming menu
Display the status panel in detail
Tap the icons shown in the upper part of the touchscreen.
Close the details of the status panel
Drag the bottom of the status panel upwards.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Magic m2+Magic m1Magic b2Magic b1

Table of Contents