Use Function Keys - RGBlink FLEXpro16 User Manual

Please refer to following steps for device selection： 【Menu】-->>【Search】-->>【Select Device】
-->>【FLEXpro16】.
The default IP Address of CPX is 192.168.0.200 and FLEXpro16 is 192.168.0.100.
1. If IP address of FLEXpro16 and CPX have not been modified before, that is, the IP of CPX and
FLEXpro16 are in the same LAN, you can directly connect CPX and FLEXpro16 via a network
cable.
2. If you use Network Communication, and the IP of CPX and FLEXpro16 are not in the same
LAN, please refer to the following steps to set the IP of CPX and FLEXpro16 to the same LAN for
data exchange.
IP Setting Steps: Menu > > Search > > Network Communications > > Local IP (modify CPX
IP).
If CPX and FLEXpro16 are in the same LAN, the Connection in the upper left corner will show
Connected after successful communication connection.
3. You can also achieve control of multiple devices at the same time by using a switch.

3.1.4 Use Function Keys

CPX will enter Matrix Mode by default after booted up. You can use function keys [MATRIX],
[OSD], [GROUP CUT], [LOAD] for more operations.
FLEXpro16 User Manual
24