Chapter 2: Maintenance And Fault Finding; Maintenance; Servicing And Safety; Instrument - Raytheon ST60 Owner's Handbook Manual

Chapter 2: Maintenance and Fault Finding

Chapter 2: Maintenance and Fault Finding

2.1 Maintenance

Servicing and safety

• Raytheon equipment should be serviced only by authorised
• Some products generate high voltages, and so never handle the
• Always report any EMC related problem to your nearest Raytheon
When requesting service, please quote equipment Type, Model
Number and, if possible, Software Release Issue. The Software
Release Issue can be ascertained by means of the Intermediate
Calibration facility, see Chapter 4, Calibration.

Instrument

Certain atmospheric conditions may cause condensation to form on the
instrument window. This will not harm the instrument and can be
cleared by increasing the illumination to the brightest setting.
Periodically clean your ST60 instrument with a soft damp cloth. Do
NOT use chemical and abrasive materials to clean the instrument.

Transducers

Refer to the Installation and Maintenance instructions supplied with
the transducers.

Cabling

Examine all cables for chafing or other damage to the outer shield and,
where necessary, replace and re-secure.
Raytheon service engineers. There are no user-serviceable parts in
any Raytheon product.
cables/connectors when power is being applied to the equipment.
dealer. We will use any such information to improve our quality
standards.
9