Chapter 1: Operation
Trip
The trip key gives access to log, trip, water temperature and timer
displays, as shown in the Using the trip key illustration.
Log
The Log screen shows the total distance covered by the vessel since the
instrument was fitted.
Trip screen
The trip screen shows the distance covered since the trip value was last
reset.
The trip value is reset automatically at power-up, and if the instrument
is operating as a master, the trip value can also be reset manually by
pressing the reset key for 3 seconds.
trip
Trip
trip
Water
temperature
trip
Using the trip key
Log
Count-up timer
trip
10 minute
race start
timer
trip
5 minute
race start
timer
trip
D4415-1
5