Depth; Depth Units - Raytheon ST60 Owner's Handbook Manual

Chapter 4: Calibration
2. Press the depth and speed keys for approximately 2 seconds so
3. Carry out the User calibration procedures for Depth and Speed.

Depth

To calibrate the depth functions:
1. With the User calibration entry screen displayed, press the depth
2. Referring to the User calibration - depth illustration, carry out the

Depth units

You can set either FEET or METRES.
that the User calibration entry screen is displayed.
key.
calibration procedure. Use the depth key to cycle from screen to
screen and the trip and reset keys to set the required values at
each screen.
depth
Set depth
offset
User calibration - depth
From User calibration
start screen
Set depth
units
Shallow
alarm lock
depth
depth
D4417-1
29