Instrument; Transducer; Cabling; Fault Finding - Raytheon ST60 Owner's Handbook Manual

4
• Some products generate high voltages, and so never handle the
• Always report any EMC related problem to your nearest Raytheon
When requesting service, please quote equipment Type, Model
Number and, if possible, Software Release Issue. The Software
Release Issue can be ascertained by means of the Intermediate
Calibration facility, see Chapter 4, Calibration.

Instrument

Certain atmospheric conditions may cause condensation to form on the
instrument window. This will not harm the instrument and can be
cleared by increasing the illumination setting to Level 3.
Periodically clean your ST60 instrument with a soft damp cloth. Do
NOT use chemical and abrasive materials to clean the instrument.

Transducer

If the windvane is removed from its mounting block for any reason, fit
the blanking cover (supplied) to the windvane mounting block
connector.

Cabling

Examine all cables for chafing or other damage to the outer shield and,
where necessary, replace and re-secure.

1.5 Fault finding

Preliminary procedures

Changes in the electronic environment may adversely affect the
operation of your ST60 equipment. If a you appear to have a problem,
first ensure that the EMC requirements (see Chapter 2, Installation &
Calibration) are still being met before further investigating the
problem.
cables/connectors when power is being applied to the equipment.
dealer. We will use any such information to improve our quality
standards.
ST60 Club House Wind Instrument Owner's Handbook