Depth; Current Depth Display - Raytheon ST60 Owner's Handbook Manual

2
• Using the speed key. This gives access to maximum speed,
• Using the trip key to gain access to log, trip, water temperature and
All key presses are momentary unless otherwise stated.

Depth

Use the depth key to select the required information, as shown in the
Using the depth key illustration. The depth measurement units are
either feet or metres, as selected during user calibration (see Chapter 4,
Calibration).
Shallow
alarm threshold
depth
Deep
alarm threshold
Using the depth key

Current depth display

The current depth screen shows the title DEPTH, the selected depth units
and the depth measurement. It also shows a depth trend indicator,
which is either an up arrow to show seabed rising or a down arrow to
show seabed falling.
average speed and Velocity Made Good (VMG) to windward.
timer information.
Current depth
depth
To enable/disable any alarm
reset
Press
To enter and exit alarm adjust mode
Press
trip
In adjust mode, use
trip
to decrease or
ST60 Tridata Instrument Owner's Handbook
for 2 seconds
(toggle action)
reset
and together
reset
to increase
depth
depth
Anchor deep
alarm threshold
depth
Anchor shallow
alarm threshold
D4413-1