Print From Usb; Removing The Usb Memory Device - Fuji Xerox ApeosPort-VII P5021 User Manual

4 Print

Use media formatted with digital cameras or computers (FAT12, FAT16, FAT32 only).

Use USB memory devices with a storage capacity of up to 128 GB only.
 If a file name contains device-dependent codes, the file may not be recognized or displayed on the screen
correctly.

CMYK TIFF and JPEG (JFIF) files are not supported.
 The following USB memory devices are not supported:
 A USB memory device with multiple media partitions that require other utilities to access to the contents
therein.
 A USB memory device connected via an external hub.

Print from USB

1
Insert the USB memory device into the USB memory slot.
Note

Insert the USB memory device after exiting from the Power Saver mode.

When a USB memory device is already inserted in the USB memory slot, tap [USB] on the Home screen and
proceed to Step 3.
2
Tap [OK].
3
Tap [Print from USB].
4
Tap the file to print from the folder.
Note

When the [Print from USB] screen appears, tap [Add File].

When you want to print or delete more than one files, place a check mark in the check box of the files.
5
Configure the settings as required.
Reference
 For more information, refer to "Features List" (P.83).
6
Tap [Print].

Removing the USB Memory Device

Important

If you remove the USB memory device while it is being accessed or the data is being printed, the data in the
device may be damaged.
 Eject the medium before switching off the power.
Remove the USB memory device using the following procedure.
1
Tap
2
Tap [Remove].
3
Remove the USB memory device.
82
on the setting screen.