Table of Contents
Advertisement
4 Print
Delayed Print
Start printing automatically at the specified time. If the power is switched off when jobs are
in queue (before the specified print time), the jobs whose print time has elapsed will
automatically be printed immediately after the power is switched on again.
The following describes how to print or delete jobs stored with the Delayed Print feature.
Note
Use the print driver to send the Delayed Print jobs. For information on how to print, refer to the help of the
print driver.
The Delayed Print feature may not be available depending on the setting for [Receive Control] under [Sample
Set / Delayed Print]. For more information, refer to "[Receive Control]" (P.165).
1
Tap [Jobs] on the Home screen.
Note
You can display [Delayed Print] on the Home screen using the customization feature. For more information,
refer to "Customization Feature" (P.53).
2
Tap [Delayed Print] at the bottom of the screen.
Note
When [Sample Set / Delayed Print] is displayed at the bottom of the screen, tap [Sample Set / Delayed Print]
> [Delayed Print].
When [Other Jobs] is displayed, tap [Other Jobs] > [Delayed Print].
3
Tap the file to print.
Note
To delete a file, select the file and tap [Delete].
The image of a direct print job from the USB port is not previewed.
Reference
For information on the button operation, refer to "Common Operation Buttons" (P.50).
4
Tap [Print].
Prints the Delayed Print job. After printing, the job is deleted. If printed manually, the job
will not be printed at the specified time.
Note
If [Print Job Confirmation Screen] is set to [Off], the device automatically deletes the job after printing
without displaying the confirmation screen. For more information, refer to "[Print Job Confirmation Screen]"
(P.131).
Secure Print
Set a passcode to the print file and save. This feature is helpful to print confidential
documents because the file can be printed only when the passcode is entered from the
control panel.
The following describes how to print and delete the stored documents.
Note
Use the print driver to send the Secure Print jobs. For information on how to print, refer to the help of the print
driver.
The Secure Print feature may not be available depending on the setting for [Receive Control] under [Sample
Set / Delayed Print]. For more information, refer to "[Receive Control]" (P.165).
76
Advertisement
Table of Contents
