Replacing the ACCUPLT PC board
Removing the
ACCUPLT PC
board
Installing the
ACCUPLT PC
board
36
Open housing as described in the
1
"Opening the housing" section
Disconnect plugs (6), (8), (9) and
2
(10)
Remove six TX20 screws (2, 3, 4, 5,
3
7)
Remove six TX25 screws (1)
4
Remove ACCUPLT board
5
NOTE!
On power sources with VRD option,
the plug X13 must be moved from the
old PC board to the new one.
Insert the new ACCUPLT PC board
1
Fit six TX20 screws (1). Torque: 1.5
2
Nm
Fit six TX25 screws
3
- (2) Battery positive lead
- (3) Boost choke
- (4) Output choke
- (5) Battery negative lead
- (6) Welding current. Torque: 3.0
Nm
Connect plugs (6), (8), (9) and (10)
4
Close housing as described in the
5
"Closing the housing" section