Makine Ocala Tae Settings Iticc Ee. T Thot Cawsisdcaari Eevee Tact Cu Lisees Eaten Atiastunausadcd Ages Veaaceasieonasaeal; Trine Seca Tubs Aoin7 Ol Ax Caisra Iiss Sore Tioonintt Sancti Etcdsevataahltart Mechta Bret Tchessic Tuts Sath Solent Eakbas - Roland XP-10 Owner's Manual

Chapter 3. Convenient performance functions
Making Scale Tune settings
You can adjust the Scale Tune settings to make a vari-
ety of scales. These settings allow you to make fine
adjustments in 1 cent (1/100th of a semitone) to the
pitch of each note C-B.
1. Press [EDIT].
The indicator will light.
2. Use VALUE[-]/[+] to select "System Setup" and
press [ENTER].
3. Press [7] several times to select "Scale Tune C" —
"Scale Tune B."
* If you hold down [ENTER] and press [7], you will
return to the previous item.
* You can also select the note whose pitch you wish
to change by playing a note on the keyboard.
4. Use VALUE[-]/[+] to set the value (-64-+63).
5. Press [EDIT].
The indicator will go off, and the previous display
will reappear.
Setting examples
Here are examples of scales based on a root of C.
Note name Equal Pure Arabic Scale
Temperament Temperament (C)
Cc Q 6
CH 0 8 +45
D 0 +4 -2
D# 0 +16 -12
E 0 -14 -51
F 0 -2 8
F# 0 -10 +43
G 0 +2 4
G# 0 +14 +47
A 0 -16 0
A# 0 +14 -10
B 0 +12 -49
* In this example, the Arabic Scale can be played in
the three keys of G, C, and F.
Turning Scale Tune on/off
This can be set independently for each Part. When
Scale Tune is turned off, that Part will use Equal
Temperament.
1. Press [EDIT].
The indicator will light.
2. Use VALUE[-]/[+] to select "Perform Part" and
press [ENTER].
3. Press [7] several times to select "Scale Tune."
* If you hold down [ENTER] while you press [7], you
will return to the previous item.
4. Use PART [<@]/[B> ] to select the Part for which
you want to make the setting.
* You will be able to select only two Parts (Upper Part
and Lower Part) if the Keyboard Mode (p.19) is set
to Dual, X-dual, or Split.
5. Use VALUE[-]/[+] to switch the setting
"ON" / "OFF".
* If you wish to make settings for other Parts, repeat
steps 4-5.
6. Press [EDIT].
The indicator will go off, and the previous display
will reappear.
33