List Of Settings Applying To The Entire Xp-10 (System Setup); Sefting Proce Sre 5. Couscikctszsereny Eee Vende Ese Ist Cess On Dauseusicasand Capes Adioasnnitevncsieel Ss Ateaiaetieteemeeearuy Aes; List Gb Setbitng)S 205 Fas Aceecylaaeie Cndecasunne Niece Cdsewbasalsansty Es Byottangede Nudes Ina Baaoan Syaieds Oo Apananetvg Guereeectcucteanutedt - Roland XP-10 Owner's Manual

Chapter 11. List of functions
List of settings applying to the
entire XP-10 (System Setup)
Setting procedure
1. Press [EDIT].
The indicator will light.
2. Use VALUE[-]/[+] to select "System Setup" and
press [ENTER].
3. Press [7] or [9] several times to select the function
that you wish to set.
* If you hold down [ENTER] while you press [7] or
[9], you will return to the previous item.
4. Use VALUE[-]/[+] to set the value.
* If you wish to make settings for other functions,
repeat steps 3-4,
5. Press [EDIT].
The indicator will go off, and the previous display
will reappear.
* System Setup settings will remain in effect even if
you change Performances.
List of settings
MIDI- and pitch-related settings ([7]: MIDI/TUNE)
Local Control on/off (Local)
Setting: ON, OFF
("Turn off the XP-10's Local Control" p.44)
GS Reset Receive Switch on/off (Rx GS Reset)
Setting: ON, OFF
This setting determines whether or not the XP-10 will
receive the GS Reset message that resets the XP-10 to
the GS basic settings.
("Cautions for playback" p.49)
System Exclusive Receive Switch on/off (Rx System Excl)
Setting: ON, OFF
("Setting the Exclusive Receive Switch" p.48)
Performance Dump Transmit Switch on/off (Tx
PerformDump)
Setting: ON, OFF
("Recording the Performance settings" p.46)
User Bank Select Transmit on/off (Tx UserBankSel)
Setting: ON, OFF
("Selecting sounds" p.49)
Device ID Number (Device ID#)
Setting: 1-32
("Setting the Device ID Number" p.46)
62
Control Change number transmitted/received by
Slider 1 (Slider 1 CC#)
Setting: 1-31, 64-95
This setting determines the number of the Control
Change message that is transmitted from MIDI OUT
when Slider 1 is moved.
("Make sure that system controller settings are the
same for recording and for playback" p.47)
Control Change number transmitted/received by
Slider 2 (Slider 2 CC#)
Setting: 1-31, 64-95
This setting determines the number of the Control
Change message that is transmitted from MIDI OUT
when Slider 2 is moved.
("Make sure that system controller settings are the
same for recording and for playback" p.47)
Control Change number transmitted/received by the
pedal (Pedal CC#)
Setting: 1-31, 64-95
This setting determines the number of the Control
Change message that is transmitted from MIDI OUT
when the pedal is moved.
("Make sure that system controller settings are the
same for recording and for playback" p.47)
CTS/RTS on/off (CTS/RTS)
Setting: ON, OFF
If MIDI messages are not transmitted/received cor-
rectly when you have connected a computer using a
computer cable, turn the setting ON. The setting is
automatically turned OFF when the XP-10 power is
turned on.
Master Key Shift (MstrKeyShift)
Setting: -24-+24
("Transposing the playback of a song you recorded
(Master Key Shift)" p.48)
Master Tune (MasterTune)
Setting: 415.3-466.2 Hz
("Adjusting the pitch to other instrument" p.15)
Scale Tune (ScaleTune C - ScaleTune B)
Setting: -64-+63
("Changing from equal temperament to Pure
Temperament or an Arabic scale (Scale Tune)" p.33)
Control-related settings ([9]: CONTROL)
Adjusting the display contrast (LCD Contrast)
Setting: 14
This adjusts the brightness of the display. Set it so that
the display is easiest to read.