Editing A Scene; (Scene Edit); Ä Scene Edit/Part Edit; Configuring Scene Common Settings (Scene Edit) - Roland JUNO-X Reference Manual

Editing a Scene

Scene Edit/Part Edit
Detailed settings can be made using the edit pages, which you can access from the SCENE TOP screen by using the [Í] [Ë] buttons.
SCENE
> >
ARP
ARP PART
COMMON
EDIT
< <
EDIT
Configuring Scene Common Settings
The scene edit pages let you make settings that are common to the scene.
1 .
Press the [SCENE] button .
The SCENE TOP screen appears.
MEMO
If you hold down the [SCENE] button and press the [PART/FUNC] button, the part list screen appears.
2 .
Use the [Í] [Ë] buttons to move to the scene edit page for the item that you want to edit .
3 .
Use the [ÇSELECTÉ] knob to select the parameter that you want to edit, and use the [- VALUE +] knob to change
the value .
For details, refer to "Parameter Guide" (PDF).
4 .
If you want to save the setting, execute the Scene Write operation .
* If you want to save a tone individually, use the tone write operation (p. 26).
4-1 .
Hold down the [SHIFT] button and press the [MENU] (WRITE) button.
The WRITE MENU screen appears.
4-2 .
Use the [ÇSELECTÉ] knob to select "SCENE," and then press the [ENTER] (INIT) button.
4-3 .
Use the [ÇSELECTÉ] knob and the [- VALUE +] knob to select the save-destination, and then press the [ENTER] (INIT) button.
To rename the scene that's being saved, use the [Í] [Ë] buttons to move the cursor and use the [- VALUE +] knob to select the characters.
4-4 .
Press the [ENTER] (INIT) button.
4-5 .
To execute, press the [ENTER] (INIT) button.
Basic settings related to I-Arpeggio
(ARP COMMON EDIT)
These are I-Arpeggio basic settings. You can also specify the rhythm
pattern that's used for arpeggio performance, and the keyboard
region that is detected by I-Arpeggio.
Basic settings for scenes
These are basic settings for scenes.
These settings let you assign functions to controllers such as the
buttons or knobs, and configure the settings for controlling an
external device.
22

(SCENE EDIT)

>
<
[EXIT] button
SCENE TOP
screen
(Scene Edit)
(SCENE COMMON EDIT)
> > >
SCENE
SCENE PART SCENE ZONE
COMMON
EDIT EDIT
< < <
EDIT
[ENTER] (INIT) button
SCENE
SELECT
Delay settings
These are settings for the delay that is used in common by all parts.
* These settings are valid only if the "SYSTEM EFFECT: Dly" source is set to
"SCENE."
Ø "Editing the System Settings (System)" (p. 43)
Reverb settings
These are settings for the reverb that is used in common by all parts.
* These settings are valid only if the "SYSTEM EFFECT: Rev" source is set to
"SCENE."
Ø "Editing the System Settings (System)" (p. 43)
SCENE
Ã
> > >
SCENE PART SCENE SCENE
MFX EFFECT: Dly EFFECT: Rev
< < <
* Press the [EXIT] button to return to the SCENE TOP
screen.
(SCENE EFFECT: Dly)
(SCENE EFFECT: Rev)
MODEL
PART
BANK
 Â
>
SCENE SCENE
EFFECT: Cho EFFECT: OD
<