Returning To The Factory Settings - Roland Jupiter-Xm Owner's Manual

Settings for the Entire Unit
Making the Power Automatically Turn Off
After a Time
(Auto Off )
1.
Press the [MENU] button.
2.
Use the [1] knob to select
[ENTER] button.
You can also make this selection by using the
instead of the [1] knob.
3.
Use the [1] knob to select
change the setting.
If you don't want the unit to turn off automatically, choose
setting.
Parameter Value
[1] knob [2] knob
OFF, 30 [min], 240 [min]
Auto Off
4.
To save the setting, press the
The save page appears.
If you decide to cancel, press the
5.
To execute, press the [ENTER]

Returning to the Factory Settings

(Factory Reset)
Here's how the settings that you edited and saved on the JUPITER-Xm
can be returned to their factory-set condition.
* When you execute this operation, all saved settings including the sound
parameters will be lost.
* If you will later need the current settings, be sure to use the backup
function (p. 19) to save the current settings before you restore the
factory settings.
1.
Press the [MENU] button.
2.
Use the [1] knob to select
[ENTER] button.
You can also make this selection by using the
instead of the [1] knob.
3.
Use the [1] knob to select
the [ENTER] button.
The FACTORY RESET screen appears.
If a sound pack or wave expansion is installed or
imported
If a sound pack or wave expansion is not installed or
imported
22
"SYSTEM," and then press the
PAGE [ ] [ ] buttons
"Auto Off" and use the [2] knob
"OFF"
[WRITE] button.
[EXIT] button.
button.
"UTILITY," and then press the
PAGE [ ] [ ] buttons
"FACTORY RESET," and then press
4.
Use the PAGE [ ] [ ] buttons
and press the [ENTER] button
Press [ENTER] again to clear the check box.
Item Explanation
Initializes the scenes and user tones (* 1).
Reset User Data
Reset System Data Initializes the system settings (* 1).
Initializes the user license and wave expansion. Initializing
the user license lets you import/install a sound pack or
Remove License
wave expansion that was downloaded with a different
(*2)
user license.
to
* This deletes the currently installed wave expansion.
* 1 Performing these operations erases any of the relevant data you have
edited after purchase.
To save the current settings, be sure to use the backup function (p.
19) before you restore the unit to its factory settings.
* 2 This is displayed if a sound pack or wave expansion is installed.
For more details on user licenses, see the
Installation Manual"
5.
Press the cursor [>]
A confirmation message appears.
If you decide to cancel, press the
6.
To execute, use the
the [ENTER] button.
The display indicates
7.
Turn the power of the JUPITER-Xm off and then on again.
* Never turn off the power or disconnect the USB flash drive during a
process, such as while the
to select the item to execute,
to select its check box.
"Sound Pack/Wave Expansion
(PDF).
button.
[EXIT] button.
[2] knob to select "OK," and then press
"Completed. Turn off power. "
"Executing..." display is shown.