Setting The System Exclusive Receive Switch; Transposing The Playback Of A Song You Recorded (Master Key Shift); Soltinig The Master: Kaye Shit Ltiaaaitsis Coasvesectessitan Cas Eae Voessctaunsana Deesonesitchasaadatabue De Cacp Vo Wisacandolsouauets; Adding Other Midi Sound Sources - Roland XP-10 Owner's Manual

Chapter 7. Using a sequencer to create an ensemble
Setting the System Exclusive Receive
Switch
1. Press [EDIT].
The indicator will light.
2. Use VALUE[-]/[+] to select "System Setup" and
press [ENTER].
3. Press [7] several times to select "Rx System Excl."
* If you hold down [ENTER] while you press [7], you
will return to the previous item.
4. Use VALUE[-]/[+] to turn the setting "ON".
5. Press [EDIT].
The indicator will go out, and the previous display
will reappear.
Transposing the playback of a song
you recorded (Master Key Shift)
If you wish to transpose the playback of a song, use
the Master Key Shift setting.
Setting the Master Key Shift
This setting will transpose all Parts except for the
Drum Part. You can specify a transposition in semi-
tone steps over a range of +/-2 octaves.
* This setting will also transpose data received at
MIDI IN.
1. Press [EDIT].
The indicator will light.
2. Use VALUE[-]/[+] to select "System Setup" and
press [ENTER].
3. Press [7] several times to select "MstrKeyShift."
* If you hold down [ENTER] while you press [7], you
will return to the previous item.
4, Use VALUE[-]/[+] to set the value (-24-+24).
5. Press [EDIT].
The indicator will go out, and the previous display
will reappear.
Adding other MIDI sound
sources
Connections
Make connections as shown below. If you play the
XP-10 in this setup, both the XP-10 and the other
sound source will sound in response to your playing.
48
* The MIDI THRU connector re-transmits all data
that was received at MIDIIN.
Sound Module A
MIDI THRU
oo J = — J
Sound Module A
MIDI IN
If you connect two or more other MIDI sound
sources, be aware that the MIDI signal will become
increasingly degraded the further away it gets from
the XP-10. This can cause data reception errors. If you
wish to connect four or more devices, we recommend
that you use a MIDI Patcher (sold separately: A-880)
to make connections as shown below.
Sound Module B
rm THU
XP-10
{Ean
Setting the XP-10 Transmit Channel
Set the XP-10 Transmit Channel to match the Receive
Channel of the other MIDI sound source. For details
on setting the XP-10 Transmit Channel, refer to
"Set/check the Keyboard Transmit Channel" (p.45).