Table of Contents
Advertisement
3. Press the
on the remote, select the
signal source and press the
4. Select HDMI1, HDMI2 or HDMI3 as
source and press the
18.5 Connecting Digital Multi-Chan-
nel Amplifier/AV Receiver
1. Connect the HDMI1 (e-ARC) socket on
the TV set to the relevant socket on the
HDMI e-ARC / ARC compliant Digital
multichannel amplifier / AV receiver us-
ing a standard HDMI cable or connect
the Optic Out socket on the TV set to
the relevant socket on the AV receiver
using a standard optic digital cable.
Important:
• Do not use a HDMI cable longer than 5 m
for HDMI e-ARC/ARC connection.
2. From Home Screen menu, press
3.
select Settings and press the
4. Select Device Preferences option, and
press
.
5. Select Display & Sound option, and
press the
.
6. Select Sound option, and press the
7. Select eARC and use
8. Press
to return to the previous menu
or press
to return to Home menu.
18.6 CY (Common Interface)
18.6.1 What is Common Interface?
• Common interface (CI) is an interface
used in DVB receivers.
• Scrambled channels can only be viewed
with a CA module suitable for the encod-
ing system and the corresponding smart
card.
• Your television is equipped with a Com-
mon interface slot into which CA mod-
ules from various providers can be inser-
ted.
• You can insert the provider's smart card
into the CA module in order to enable the
encrypted stations you want to see.
.
.
.
.
.
to select Auto .
EN / 85
• Your TV supports CI+1.4.
18.6.2 Inserting the CA module
Important:
• Switch off the appliance before inserting
the CA module in the COMMON INTER-
FACE slot.
1. Insert the smart card into the CA mod-
ule.
2. Insert the CA module with the smart
card into the COMMON INTERFACE slot
on the television.
Notes:
• To see which CA module is present in the
Common slot, go to the CA - Module sub-
menu.
• When you insert a CA module into the CI
slot on the television for the first time,
wait a few moments until the television
has registered the CA module.
18.6.3 Access Control for CA Mod-
ule and Smart Cards
1. Press the
and then the
2. Use the
to select CI Card and press
the
.
ð CA Information menu will be displayed.
Notes:
• This menu give operating instructions
and – after you enter your PIN code – ac-
cess to channels of the PAY-TV provider.
• Other settings are described in the manu-
als for your CA module and smart card.
.
Advertisement
Table of Contents
