Table of Contents
Advertisement
20.4 Antenna Settings for Digital
Satellite Channels and Search-
ing for Channels Automatically
with the Single Channel Router
(SCR) system
Your TV supports SCR (Single
Channel Router) system. SCR
(Single Channel Router - EN 50494).
LNB settings described in the fol-
lowing section require significant
expertise on satellite systems. Con-
tact an expert about the subject.
1. Press the
to switch to the TV mode.
2. Press the
, select Source and press
the
.
3. Select Satellite option, and press the
4. Press the
, select Settings and press
the
.
5. Select Channels & Inputs option, and
press
.
6. Select Channels option, and press the
.
ð Channel menu will be displayed.
7. Select Channel Installation Mode op-
tion, and press the
8. Select Satellite (Standard) or Satellite
(Operator Mode) if you are using an op-
erator, and press the
9. Select Channels option, and press the
.
10.Select Automatic Channel Scan op-
tion, and press the
ð Automatic Channel Scan menu will
be displayed.
11.Select Other option, and press
.
.
.
.
EN / 96
Automatic Channel
Scan
Next
Other
.
12.As per the type of the single cable router
multiswitch on your antenna system, se-
lect Single Cable I or Single Cable II
and press the
.
Advertisement
Table of Contents
