Table of Contents
Advertisement
1. In the Device Info Setting menu, use
the
to select Set Time Shift and/
/
or Set PVR and press the
2. As per the selection you have made in
the Device Information menu, TSHIFT,
PVR or PVR/TSHIFT is displayed.
Notes:
• You can connect two different external
data media to the TV and select one as
PVR record and the other one as TSHIFT
record.
• Functions do not work if no external data
medium is assigned for recording/time
shift.
10.4.3 Data Medium Test
You can test the external data media to see
if it is suitable for the required functions.
1. From the Device Info Setting menu,
use the
to select Speed Test and
/
press the
.
2. The test result of the data medium will
be displayed on the screen within 10 to
60 seconds as per the volume of the
drive.
3. Select Exit and press the
Speed Test menu.
10.5 Turning the Time Shift Func-
tion On/off
You can turn time shift off or on with this
feature.
1. Press the
to switch to the TV mode.
2. Press the
and use the
Save tab.
3. Use the
to select Time Shift Mode
and press the
ð Time Shift Mode menu will be dis-
played.
4. Time Shift Mode from the option
Off use the select.
5. Press
to return to the broadcast.
.
to exit the
to select the
.
10.6 Disk Setup the Time Shift Drive
If you are going to connect an external data
medium to TV for the first time and use it
for time shift, a disk setup is required.
10.6.1 Automatic Installation
1. Connect the external data medium to
the USB input of TV.
Note:
• The Time Shift Mode shall be selected
as, On to be able to install the Time Shift
disk setup.
2. Press
ð Disk Setup menu will be displayed.
3. Select Auto and press the
ð The external data medium is automat-
ically configured and the Disk Setup
Complete message displayed.
Notes:
• This should be done when an external
data medium is first connected to the TV
set or when the external data medium is
formatted by the TV set.
• An external drive with a volume larger
than 4 GB is required for this operation.
• Auto set-up creates 4GB of time shift
space on drives below 32GB and 16GB
on drives above 32GB.
4. Press
10.6.2 Manual Set-up
1. Connect the external data medium to
the USB input of TV.
Note:
• The Time Shift Mode shall be selected
as, On to be able to install the Time Shift
disk setup.
2. Press
ð Disk Setup menu will be displayed.
On,
3. Use the
with the
EN / 50
.
to return to the broadcast.
.
to confirm the Manual item
.
.
Advertisement
Table of Contents
