Turning On Your Television For The First Time And Tuning; Performing Digital Channel Settings - Beko INTEGRATED DIGITAL HD READY COLOUR TELEVISIONS 32WLU530HID Operating Instructions Manual

6.2-Turning on your television
for the first time and tuning
Installation Guide menu will be displayed on
the screen when you turn on your television
for the first time.
Installation Guide
Language Settings
Active antenna power
Auto tuning
Select
Press Right/Left movement buttons to
select the desired menu language from the
Language tab. If you are using an active
antenna, (See page 16) set the active antenna
power feature to On. Select Auto Search
by pressing the down movement button and
confirm your selection with OK button or the
right movement button. Country Selection
menu will be displayed. Make the Country
and Scan Type selections by pressing the
Up/Down, Left/Right movement buttons.
Time Zone will be set automatically according
to the country selected. If the antenna
connections are correct, press OK button to
start Auto Search.
Press EXIT button to cancel the Auto Tuning.
6.3-Performing Digital channel
settings
You can tune the Digital programs
automatically or manually and store them in
your television.
6.3.1-Automatic tuning of digital
channels and storing in the
memory
Press the MENU button on your
remote control. Select CHANNEL
SETUP by pressing the Right/Left
movement button and confirm your
selection with OK button. Select
Auto Tuning tab by pressing the
Up/Down movement buttons and
press Right movement button or OK
button to confirm. Country Selection
menu will be displayed.
English
Exit
CHANNEL SETUP
Please select country and scan type, then press OK to start tuning
Country Selection
Scan Type
Time Zone
Select
Scroll to the Country Selection
tab by pressing the Up/Down
movement buttons and press Right/
Left movement buttons to select
your country. Then, scroll to the
Scan Type tab by pressing the
Down movement button and select
DTV option by pressing the Right/
Left movement buttons. Press OK button to
confirm your selections. Digital channels are
searched and stored automatically. At the
same moment, the progress of auto tuning
and the channels stored in the memory are
displayed in the menu.
Program Table menu is displayed at the end
of the Auto Tuning.
Note: If you wish to search the Digital and
Analogue channels concurrently, choose
Scan Type as Digital and Analogue from
the Auto Tuning menu.
11
England
DTV
London GMT
Back
Exit
Searching
%1 68 MHz
1 C-03
2 C-04
Exit