Table of Contents
Advertisement
Note:
• When the Motion Control is selected as
USALS, theMove to East, Move to West
and Stop Movement options are not dis-
played in the menu.
23.To return to the Motor Settings menu,
press the
.
24.Select the Setting options with the
ð Disable Limits: Removes maximum
rotation limits of the antenna.
ð Limit East: Sets the limit position that
the antenna can turn to east at max-
imum and allows the antenna to move
within the specified limits.
ð Limit West: Sets the limit position that
the antenna can turn to west at max-
imum and allows the antenna to move
within the specified limits.
25.Return to the Automatic Channel Scan
menu by pressing the
26.Select Scan Mode and use
lect Full or Network.
27.Select Scan Type.
ð Select Only Free Channels for unen-
crypted channels only
ð Select Encrypted Channels Only for
encrypted channels only
ð Select All for all satellite channels.
28.Select Store Type.
ð Select Only Digital Channels for TV
channels only
ð Select Only Radio Channels for radio
channels only
ð Select All for scanning both options.
29.To return to the Automatic Channel
Scan menu, press the
Note:
• Make the settings described in steps 17
to 27 for each satellite you want to scan.
.
/
twice.
to se-
/
.
EN / 100
30.Select Next option and press the
ð Automatic Search menu will be dis-
played and the search for TV stations
shall start.
ð Search may take several minutes de-
pending on the number of television
stations received.
31.Press
to return to the previous menu,
press
to return to TV broadcast or
press
to return to Home menu.
20.6 Searching for Newly Added Di-
gital Channels with Satellite
Update
With the satellite update feature, only newly
added channels are found and saved at the
end of the programme list.
1. Press the
to switch to the TV mode.
2. Press the
, select Source and press
the
.
3. Select Satellite option, and press the
4. Press the
, select Settings and press
the
.
5. Select Channels & Inputs option, and
press
.
6. Select Channels and confirm with the
.
ð Channel menu will be displayed.
7. Select Satellite option, and press the
8. Select Channel Installation Mode op-
tion, and press the
9. Select Satellite (Standard) or Satellite
(Operator Mode) if you are using an op-
erator, and press the
10.Press the
to return to the previous
menu.
11.Select Satellite Update option and
press the
.
.
.
.
.
.
Advertisement
Table of Contents
