Table of Contents
Advertisement
10 USB Recording
10.1 Information on Recording and
Playing Television Pro-
grammes
• Recording and reproducing programmes,
this can only be done with digital televi-
sion stations (DVB-S, DVB-T and DVB-C).
• The digital television stations (DVB-S,
DVB-T and DVB-C) you are able to record
and playback also depend on the broad-
casting station.
• Besides recording and playing pro-
grammes, the Timeshift function can
only be carried out using an external data
medium (hard drive or USB stick).
• Recordings can be made with most data
mediums on the market. However, we
cannot guarantee operation for all data
media.
• Recording can only be done on USB
memory sticks and hard disks with FAT
and FAT32 format.
• If you record a programme on an external
data medium, you can only watch it on
your television. You cannot watch this
program on any other device.
• If you send your television to be repaired
and hardware components need to be re-
placed, you might not be able to play the
recordings again on the repaired televi-
sion.
• Beko isn't responsible for any loss of
data stored on any external storage
device.
• It is recommended to play the files saved
on DTV by PVR media player.
10.2 Possible Limitations When Us-
ing an External Data Medium
• Depending on the broadcasting station,
you may experience various restrictions
on some functions from some television
stations.
• Beko has no influence on these re-
strictions.
• Recording a programme on the external
data medium can be disabled by the
broadcaster.
• If URI* protected! PVR function is
blocked appears, then recording or time
shift is restricted (one recording pos-
sible) or disabled (recording not pos-
sible) by the broadcaster.
• *URI = user rights information.
• If you record and save a programme on
the archive of an external data medium,
playback can be restricted. The broad-
caster can allow you to see this pro-
gramme one or more times but could
also just make it available for a certain
period of time.
• Stations from which children are protec-
ted, immediately require a PIN number
before recording starts. If this authoriza-
tion is not given, the recording may not
start.
10.3 Connecting External Data Me-
dia
• It is advised to put the television on
stand-by mode before connecting the Ex-
ternal Data medium.
• Before disconnecting the external data
medium, the television shall first be
switched to standby, otherwise files can
be damaged.
• There are two USB inputs on the televi-
sion, namely USB1 andUSB2 (HDD).
• A USB device that needs additional
power (e.g. external hard drive) is con-
nected to the USB2 (HDD) port.
EN / 48
Advertisement
Table of Contents
